Shijiazhuang Yangping Import&Export Trading CO.,LTD | HRC, CRC, GI, GL, PPGI, PPGL & Seamless Pipe Supplier

PRODUCT 01 / 12

HRC

Hot Rolled Steel Coils (Black)

Rolled above recrystallization temperature, HRC offers excellent strength and formability for heavy-duty applications. Available as pickled & oiled (P&O) on request.

Q195 / Q235BSS400A36S235JRSPHC

Typical Specifications

Thickness	1.2 mm – 25.0 mm
Width	600 – 2000 mm (slitting available)
Coil ID / Weight	Ø 508 / 610 mm · 5 – 28 tons
Standards	GB/T 3274, JIS G3101, ASTM A36 / A1011, EN 10025
Surface	Black / pickled & oiled (P&O)
Applications	Structural steel, pipe & tube making, shipbuilding, bridges, automotive frames, general fabrication

Tip: for pipe-making HRC we can supply precise coil weight & ID to match your slitting line.

Request HRC Quote Ask a Question

PRODUCT 02 / 12

CRC

Cold Rolled Steel Coils

Rolled at room temperature for tighter tolerances, a smoother surface and better flatness — the preferred substrate for precision stamping and high-gloss finishing.

SPCC / SPCDDC01 / DC0308AlQ195-Q235

Typical Specifications

Thickness	0.15 mm – 3.2 mm
Width	600 – 1800 mm
Coil ID / Weight	Ø 508 / 610 mm · up to 18 tons
Standards	JIS G3141, EN 10130, GB/T 5213, ASTM A1008
Surface / Finish	Bright / matte, lightly oiled or dry
Applications	Home appliances, automotive panels, office furniture, electronic enclosures, deep-drawn parts

Options: full-hard, annealed, temper-rolled, and narrow slit coils for precision industries.

Request CRC Quote Ask a Question

PRODUCT 03 / 12

GI Coils

Hot-Dip Galvanized Steel Coils

Continuous hot-dip zinc coating protects against rust in outdoor and humid environments. Choose spangle type and coating weight to fit your climate and budget.

SGCC / SGHCDX51D+ZSPGCZ40–Z275

Typical Specifications

Thickness	0.15 mm – 6.0 mm
Width	600 – 1500 mm (slitting available)
Zinc Coating	40 – 275 g/m² (Z40 – Z275)
Standards	JIS G3302, ASTM A653, EN 10346, GB/T 2518
Surface	Regular / minimized / zero spangle · skin pass · chromated / oiled
Applications	Roofing sheets, purlins, cable trays, ducts, fencing, automobile parts, household appliances

Popular: Z275 full-hard and SGCC soft grades for corrugated roofing sheet lines.

Request GI Quote Ask a Question

PRODUCT 04 / 12

GL Coils

Galvalume Steel Coils (55% Al-Zn)

Alu-zinc coating combines the long-term corrosion resistance of aluminum with the edge protection of zinc — roughly 2–4× the life of galvanized in many environments.

DX51D+AZSGLCCAZ30–AZ150CS-B

Typical Specifications

Thickness	0.15 mm – 3.0 mm
Width	600 – 1500 mm
Coating	AZ30 – AZ150 (55% Al + 43.4% Zn + 1.6% Si)
Standards	JIS G3321, ASTM A792, EN 10346, GB/T 14978
Surface	Spangle free, smooth / matte
Applications	Roofing & wall cladding, solar panel frames, air-conditioner parts, garage doors, agricultural buildings

Heat resistance: performs well under high temperature and coastal salt environments.

Request GL Quote Ask a Question

PRODUCT 05 / 12

PPGI

Pre-Painted Galvanized Coils

Galvanized substrate coated with primer + top paint in hundreds of RAL colors. Consistent color, gloss and adhesion — ready for roofing sheet lines and building panels.

RAL CustomPE / SMP / HDP / PVDFGloss 20–80%

Typical Specifications

Thickness	0.15 mm – 1.5 mm (base)
Width	600 – 1500 mm
Substrate	Hot-dip galvanized, Z40 – Z275
Paint System	Polyester (PE) · Silicone modified (SMP) · HDP · PVDF
Top / Back Coat	Top 15–25 µm + back 5–10 µm epoxy / polyester
Applications	Roofing & wall sheets, steel buildings, home appliances, ceiling panels, small household hardware

Colors: RAL, BS or custom color chips accepted; wooden / stone printed patterns available.

Request PPGI Quote Ask a Question

PRODUCT 06 / 12

PPGL

Pre-Painted Galvalume Coils

Premium color-coated coils on galvalume substrate. Excellent anti-corrosion performance and long color retention — a favorite for premium roofing and sandwich panels.

RAL CustomPE / HDP / PVDFAZ70–AZ150

Typical Specifications

Thickness	0.20 mm – 1.5 mm (base)
Width	600 – 1500 mm
Substrate	Galvalume (Alu-Zinc), AZ70 – AZ150
Paint System	PE / SMP / HDP / PVDF with anti-fingerprint option
Top / Back Coat	Top 15–25 µm + back 5–10 µm
Applications	Sandwich panels, standing-seam roofing, coastal buildings, cold-storage panels, house façades

Coastal projects? PVDF / HDP coating on AZ150 substrate is our recommended spec.

Request PPGL Quote Ask a Question

PRODUCT 07 / 12

Seamless Pipes

Carbon Steel Seamless Pipe

No longitudinal weld — uniform strength and pressure resistance. Hot-rolled or cold-drawn, hydrostatically tested, with plain or beveled ends and export-standard packing.

API 5LA106 Gr.B20#Q345BA53

Typical Specifications

Outer Diameter	6 mm – 660 mm
Wall Thickness	1 mm – 60 mm
Length	5.8 – 12 m (fixed / random)
Standards	API 5L, ASTM A106 / A53 / A519, GB/T 8163, GB/T 9948, DIN 1629
Grades	Gr.B, X42 – X70, 20#, 45#, 16Mn / Q345B, 10#
Applications	Oil & gas pipelines, boilers & heat exchangers, hydraulic & fluid transport, structures, machinery shafts

Add-ons: threading & coupling, beveling, 3.1/3.2 inspection certificates, galvanized or painted OD on request.

Request Pipe Quote Ask a Question

PRODUCT 08 / 12

Galvanized Drywall Screws

Zinc-Plated Bugle-Head Drywall Screws

Bright zinc-plated drywall screws for flush, corrosion-resistant fixing of gypsum board, fiber-cement board and light steel partitions. Consistent thread, sharp point and no rust on humid jobsites.

#6–#1025–80 mmCoarse / FineSharp Point

Typical Specifications

Diameter	#6 – #10 (3.5 – 4.8 mm)
Length	25 – 80 mm (1″ – 3¼″)
Head / Drive	Bugle head · Phillips No.2 cross recess
Thread	Coarse (wood studs) / Fine high-low (metal studs)
Material & Finish	Low-carbon steel wire, case hardened · electro-zinc plated
Standards	ASTM C1002 · DIN 7982 · GB/T 846
Applications	Gypsum board & plasterboard to wood or steel studs, ceilings, partitions, fiber-cement board

Packing: export cartons on pallets; bulk or small-box packing per your requirement.

Request GDS Quote Ask a Question

PRODUCT 09 / 12

Black Phosphate Drywall Screws

Black Phosphate Bugle-Head Drywall Screws

Black phosphate coated drywall screws — a low-glare, corrosion-resistant finish with a slight friction-dampening layer for easier driving. Ideal for standard drywall installations and board-to-steel framing.

#6–#1025–80 mmCoarse / FineBlack Phosphate

Typical Specifications

Diameter	#6 – #10 (3.5 – 4.8 mm)
Length	25 – 80 mm (1″ – 3¼″)
Head / Drive	Bugle head · Phillips No.2 cross recess
Thread	Coarse (wood studs) / Fine high-low (metal studs)
Material & Finish	Low-carbon steel wire, case hardened · black phosphate coating
Standards	ASTM C1002 · DIN 7982 · GB/T 846
Applications	Gypsum board to wood or steel studs, ceilings, partitions, fiber-cement board, general drywall

In stock: both coarse and fine thread; bulk or small-box packing to order.

Request BPS Quote Ask a Question

PRODUCT 10 / 12

Concrete Nails

Hardened Masonry / Concrete Nails

High-carbon hardened & tempered nails built to drive into concrete, brick and block without bending or breaking. Blued or galvanized finish with knurled shank for extra grip.

Ø2.0–4.5 mm25–100 mmHRC 45–55Blued / Galvanized

Typical Specifications

Diameter	2.0 – 4.5 mm
Length	25 – 100 mm (1″ – 4″)
Material	High-carbon steel (45# / C45), hardened & tempered, HRC 45–55
Head / Shank	Flat round head · smooth / knurled diamond shank, sharp point
Finish	Blued (black oxide) or galvanized
Standards	ASTM F1667 · GB/T 343 (wire) · export grade
Applications	Fixing to concrete, brick & blockwork, flooring, formwork, timber framing

Custom: ribbed or hook shank, and other diameters & lengths made to order.

Request CN Quote Ask a Question

PRODUCT 11 / 12

Cable Clips

Nail-Type Cable Clips for Wiring

PE/PP cable clips with an attached high-carbon steel nail. Push the wire into the channel, hammer the nail in and the cable is fixed securely — quick, clean indoor wiring.

Round Ø4–40 mmSquare 4–14 mmNail Ø2.1×19 mmWhite / Black

Typical Specifications

Type	Round · Square · dual-nail; nail-attached (plug-in)
Size	Round inner Ø4 – 40 mm · square 4 – 14 mm (custom)
Nail	High-carbon steel, Ø2.1 mm × 19 mm, fixed to clip
Body Material	PE / PP, impact & UV resistant
Colors	White, black, grey (custom)
Packing	100 pcs per bag, then export cartons
Applications	Indoor wiring: fixing electric & network cables, telephone lines, small tubes and conduit to walls, ceilings, baseboards

Tip: select the clip size to match the cable diameter for a firm, slip-free hold.

Request CC Quote Ask a Question

PRODUCT 12 / 12

Corrugated Roofing Nails

Umbrella-Head Roofing Nails

Hot-dip galvanized roofing nails with a wide umbrella head and optional EPDM sealing washer — the ideal companion to your corrugated GI/PPGI roofing sheets for a leak-proof fix.

Ø3.0–4.5 mm65–100 mmHead Ø9.5–11 mmHDG

Typical Specifications

Diameter	3.0 – 4.5 mm
Length	65 – 100 mm (2½″ – 4″)
Head	Wide umbrella head Ø9.5 – 11 mm (integral or loose washer)
Washer	Optional black EPDM rubber sealing washer
Material & Finish	Low-carbon steel, hot-dip galvanized
Standards	ASTM F1667 · ASTM A153 (HDG) · export grade
Applications	Fixing corrugated GI/PPGI roofing & wall sheets to timber or steel purlins, fencing, formwork

Match: pairs with our GI / PPGI / PPGL corrugated sheet supply — ask about a combined roofing package.

Request RN Quote Ask a Question

Premium Steel Coils & Seamless Pipes, Worldwide

Our Product Range

HRC